Welcome to my Web site

Welcome to my website. This site is for folks who build or would like to build plastic model ships. I’ve been building ship models for many years and I still get as much enjoyment from the hobby as I did when I started. If you are an occasional modeler, serious modeler or if you’ve been away from the hobby for awhile and are coming back, I think you will enjoy this site.

I chose Revells’ Cutty Sark as the launch project because there are a large number of these kits out there in closets, attics and modelers collections, waiting to be built. Also, this kit builds into a pretty impressive ship model, no matter where the modelers’ skill level is.

The plan is for this site to grow over time, featuring a different model about every month. Previous models will be archived for reference and new visitors to the site. As you may have already noticed, this site is written in a blog foremat with the latest post on top and previous posts in decending order. I hope that modelers will find this website enjoyable and useful and will visit often……………..John

The Model was attached.........





The model was attached with the wood screw I mentioned earlier and tightened down. Be careful here, not too tight. White glue is applied along the gap where the model and foil meet. A toothpick works good for getting the glue into the small gaps. After the glue is dried, paint the wake. I use testors Flat White. with pretty good results . Some modelers may like to experiment with different colors. Studying photos of ships to see how the wakes look for different ships and different conditions e helpful here. Again, step back and enjoy your accomplishment!

Posted by John Higgins  

Labels:

0 comments:

Post a Comment

Subscribe to: Post Comments (Atom)