Welcome to my Web site

Welcome to my website. This site is for folks who build or would like to build plastic model ships. I’ve been building ship models for many years and I still get as much enjoyment from the hobby as I did when I started. If you are an occasional modeler, serious modeler or if you’ve been away from the hobby for awhile and are coming back, I think you will enjoy this site.

I chose Revells’ Cutty Sark as the launch project because there are a large number of these kits out there in closets, attics and modelers collections, waiting to be built. Also, this kit builds into a pretty impressive ship model, no matter where the modelers’ skill level is.

The plan is for this site to grow over time, featuring a different model about every month. Previous models will be archived for reference and new visitors to the site. As you may have already noticed, this site is written in a blog foremat with the latest post on top and previous posts in decending order. I hope that modelers will find this website enjoyable and useful and will visit often……………..John

Painting and Installing the Transome Pt.2



Installing the transom turned out to be a bit of a challenge. Cementing the main deck in place reduced the area of the stern so much that the transom would not fit. I had to dissolve the glue at the rear of the deck/hull attach point so I could spread the stern apart. The springiness of the hull at the stern required that I cement the transom one side at a time with a lot of super glue. Fortunately, this will not show on the finished model.

Posted by John Higgins  

Labels:

0 comments:

Post a Comment

Subscribe to: Post Comments (Atom)